Key features of the SKY System » Zirconium Implants - WhiteSKY

Zirconium Implants - WhiteSKY

WhiteSKY Restoration

whiteSKY - grinding with bredent ETERNA

 

Surgical Restoration
Fig. 1: whiteSKY - grinding with bredent ETERNA

  1. Large variety of shapes
  2. Considerably extended service life compared to burs with single coats
whiteSKY - grinding with bredent ETERNA

 

Surgical Restoration
Fig. 2: whiteSKY - grinding with bredent ETERNA

  1. Diamond burs with two coats
whiteSKY - grinding with bredent ETERNA

 

Surgical Restoration
Fig. 3: whiteSKY - grinding with bredent ETERNA

  1. Reduced generation of heat
whiteSKY - Zirkon-Set

 

Surgical Restoration
Fig. 4: whiteSKY - Zirkon-Set

Normally, these designs are sufficient to achieve the desired contour of the WhiteSKY restoration.
  1. Use the coarse diamond grit D 120 µm for preparing the shape
whiteSKY - Zirkon-Set

 

Surgical Restoration
Fig. 5: whiteSKY - Zirkon-Set

Normally, these designs are sufficient to achieve the desired contour of the WhiteSKY restoration.
  1. Use the fine diamond grit D 40 µm for finishing the surface
Before integrating the temporary restoration

 

Surgical Restoration
Fig. 6: Before integrating the temporary restoration:
  1. Block out the notch
  2. Grind the notch
Note: This notch is required for safe guidance of the implant in the placement instrument.
Preparation requirements

 

Surgical Restoration
Fig. 7: Preparation requirements
  1. Protection of the implant using a splint or by splinting with bars
  2. Temporary restoration in the non-occlusion area even if adjacent teeth are under stress
  3. Minimum 3-6 months

back to top

Bredent Special Offers!

bredent clinical offersbredent technical offers

Contact bredent uk

Bredent UK Ltd
Suite 1, 67-77 Chatsworth Road
Chesterfield S40 2AL

t: 01246 559 599
f: 01246 557 777
e: enquiries@bredent.co.uk